Seite 5 von 5

Re: Micha's PB 400 ParkPro

Verfasst: Mi 14. Dez 2016, 20:31
von MichaN
Hallo Kai

Danke für dein Interesse. Das freut mich sehr :D Ich werde gern berichten wenn es mir die Zeit wieder zuläßt. Im Moment bin ich leider im Umzugsstress. Werde aber Ende Januar hoffentlich die Zeit wieder haben und einen kleinen Bericht über die Ohrenzylinder machen.

Re: Micha's PB 400 ParkPro

Verfasst: So 12. Nov 2017, 20:34
von MichaN
Hallo Forum
Habe mal den Bericht überarbeitet. Da war durch den Umzug doch so einiges Durcheinander. Demnächst geht es hier wieder weiter :D

Re: Micha's PB 400 ParkPro

Verfasst: Di 7. Jul 2020, 15:08
von henke
Hello i have built a polar 600 this year and i have seen your construction on all the vay blades you have done and i would like to do the same like you.have seen some pictures and videos on youtube but i dont understand how you has solved the construction of the hydrological pistons with wires through. and how you solved the construction with the outer blades with wires?. would be very grateful if you have any pictures of your construction so I can do just as your construction.
here is my email address you can send pictures ...

henke@henkes.se

Best regards Henrik Nilsson / Sweden